Home > PAINT & SUNDRIES > PAINT > PRIMERS & SEALERS
Choose a sub category:
PRIMERS - OIL BASED MASONRY SEALERS PRIMERS - WATER BASED
Sort By:
1 2 3
WaterSeal TH.041800-18 Waterproof Wood Sealer Rustoleum Cover-Stain Primer Sealer Masterchem 10002 Extra Strength Stain Killer Primer Sealer
Provides complete outdoor wood protection.  It waterproofs long after the initial water beading is gone.  Ideal for small exterior wood projects, such as birdhouses, Adirondack chairs, mailboxes, planter boxes, wicker furniture, and more. Seals wood, masonry, drywall, all porous surfaces. Sticks to all surfaces without sanding. Spot seals water marks. Hides stains, graffiti, ink, crayon, etc. Convenient spray for hard to cover areas. Topcoat with any paint in just 30 minutes. White color. Blocks most severe stains including water, smoke, tannin, ink, pencil, felt marker, grease and also seals pet, food and smoke odors. Original may be topcoated with latex or oil-based paint. Seals porous surfaces for uniform finish. Use on: wood, drywall, plaster, paneling, wallpaper, masonry, brick, painted metal and properly prepared glossy surfaces.
Rustoleum Cover-Stain Interior/Exterior Primer Sealer Drylok 27512 Latex Based Masonry Waterproofer Kilz 10042 Interior Primer Sealer
Seals wood, masonry, drywall, all porous surfaces. Spot seals water marks. Hides stains, graffiti, ink, crayon, etc. Sticks to all surfaces without sanding. Topcoat with any paint in just 30 minutes. White color. Formulated to waterproof above or below grade masonry walls, cinder and concrete blocks, stucco, brick, retaining walls, basement, and foundations. Tintable. Low Odor. Non-flammable. Resists 10 psi water pressure. Apply with brush and/or roller. Complies with all current VOC requirements. Passes performance requirements of Fed. Spec. TT-P-1411-A. Covers 75 to 125 sq. ft per gallon depending on surface porosity. For stain blocking in areas where high odor levels are prohibitive. Blocks severe stains and odors. Seals pet, nicotine and smoke odors. Bright white and non-yellowing. No lingering odor. Stains: severe smoke and water. Odors: pet, nicotine and smoke. Use on: furniture, woodwork, paneling, wallpaper, masonry, brick and painted metal.
California 20701-4 Stain Killer Primer Weiman 5092 Stone Spray-N-Seal Penetrating Sealer Damtite 01071 Waterproofer Powder
Prevents the migration of bleeding stains. Seals water skins on plaster, ceiling tile and sheetrock. Can seal soot damage and smoke residue that remains after washing or solvent cleaning prior to repainting with latex or oil base topcoats. Protects natural stone surfaces from staining. For stone countertops, floors, walls, vanities and even grout. Also for sealing all types of masonry, stucco, concrete and sanded grout. Has special blend of polymers that bond to the stone and creates a water and oil repellant membrane to prevent staining and allows the stone to breathe and release moisture vapors. Safe for interior and exterior use and is UL Classified for slip resistance. Coverage varies depending on surface. Portland-cement base coating. Holds back 22psi of hydrostatic pressure. Safe for drinking water cisterns. Seals, protects and beautifies vertical walls constructed of concrete, masonry, brick or stucco. Eliminates dampness and resists mildew, flaking or chalking while sealing all pores and voids. Helps reduce Radon Gas penetration through concrete block walls. Just add water to powder and mix; brushes on like paint. Mix with Damtite Bonding Additive in place of water for previously-painted or non-porous surfaces (poured concrete). Coverage (varies by porosity of surface and by first or second coat): 7lb to 93 sq ft (8.6 m2); 21lb to 280 sq ft (26 m2); 45lb to 600 sf (55.7 m2).
Quikrete 8730-02 Concrete Cure and Seal Wolman RainCoat Oil Based Water Repellent Preservative Henry PR1760074 Premier Foundation Coating
Protects and seals concrete surfaces against water, salt, grease, etc. Promotes proper curing by retaining water in freshly placed concrete. Used for curing new concrete. Use to protect new or weathered wood from water damage, including splitting and warping caused by water absorption. Use as a final finish or water repellent primer under an oil-base paint or stain. Adds water repellency. Suppresses mildew staining. Lets moisture escape while preventing water penetration. Allows original wood color to show through and gray naturally. 3-part water repellent system; Gives immediate water protection and beading, helps stabilize and slow moisture release, and provides long term resistance to water penetration. Covers approximately 150-350 sq. ft. per gallon. Coverage depends on type of wood. Environmentally friendly. Asphalt emulsion. For spray or brush application to existing or new, green or damp concrete and masonry surfaces. For below grade applications to foundations, both poured concrete and CMU block. No odor, soap and water cleanup.
Damtite 03550 Masonry Waterproofer Zinsser 5001 Watertite Waterproofing Paint Henry RC065070 Roofers Choice Foundation Coating
High performance masonry waterproofer used for above or below grade applications. Alkali-resistant coating provides excellent waterproofing protection with a decorative finish for all masonry, cinder and concrete block, poured concrete, brick, stucco. Use on basement walls, retaining walls, fountains, birdbaths, planters and more. Fast drying, low odor and tintable to light pastel shades. Easy clean up. Reduces Radon Gas penetration through concrete block walls. Covers up to 150 sq. ft. (11.6 m2) per gallon. Guaranteed to stop up to 34psi of water pressure - twice the strength of other waterproofers. Prevents the growth of mold and mildew on the paint film for up to 5 years. Smooth, non-gritty finish applies easily to wet or dry walls. Ultra low odor oil-base formula has even less odor than latex paint. Great for basements and other interior/exterior above and below grade masonry surfaces. Watertite contains a mildewcide that prevents the growth of mold and mildew on the paint film only. Cures to a tough, flexible, weather resistant film. Because of its ability to retain its pliability, the coating resists damage which may result from expansion and contraction caused by weather and temperature variation. Use as an exterior underground foundation coating and dampproofer for brick, concrete, cement block, and similar surfaces. May be used as an underground exterior foundation coating and dampproofer. Covers approximately 1 to 2 gallons per 100 square feet.
Drylok 00542 Masonry Waterproofer United Gilsonite 22113 Masonry Waterproofer Damtite 01351 Supertite Masonry Waterproofer
Decorates and waterproofs masonry walls. Use on above or below grade masonry walls, cinder and concrete blocks, stucco, brick, field stone foundations, retaining walls, basements and foundations. Cleans up with warm, soapy water. Coverage depends on surface porosity. Each 35 lb. will cover 140-210 sq. ft. with the first coat, 210-280 sq. ft. with the second coat. Protective coating for masonry surfaces. Prevents moisture damage. Penetrates deep to seal and protects masonry against acids, alkalis, household chemicals, gasoline, oil and salt. Covers up to 400 sq. ft. per gallon depending on surface porosity. Adheres to all types surfaces. A heavy duty, Portland cement coating that includes a dry polymer resin to increase adhesion to all types of masonry surfaces. Eliminates need for liquid bonding agent to add to mix. Seals pores, cracks, voids and smooths rough surfaces. Protects against moisture penetration while beautifying and protecting concrete, stone, masonry, stucco and brick. Use above or below grade, inside or outside. Safe for coating inside of potable water cisterns or concrete water tanks. Holds back 22 psi of hydrostatic pressure. Covers up to 260 sq ft (24.2 sq m) per 35 lb pail.
Damtite 02501 Waterproof Coating Henry PR175070 Premier Foundation Coating Damtite 01501 Waterproof Coating
Economical, heavy-duty, Portland cement-base coating to seal and protect concrete, masonry, brick, stone and stucco. Apply to wet or dry walls. Breathable coating so no moisture becomes trapped behind the surface. Holds back 12 PSI water pressure. Heavy duty formula. Can be used as an exterior, below grade foundation sealer on concrete block or poured concrete, prior to applying asphaltic-base coatings. Also for sealing and beautifying basement & garage walls, retaining & sea walls; Safe for coating the inside of cisterns for drinking water. A cold applied liquid asphalt in a solvent system. Penetrating type coating formulated to provide a durable, weather resistant film. For long-wearing protection of foundation coating. Also use to dampproofing above and below grade exterior concrete and masonry walls and foundations that are thoroughly dry. Covers 1.5 to 2.0 gallons per 100 sq. ft. depending upon the porosity and roughness of the surface. Economical, heavy-duty, Portland cement-base coating to seal and protect concrete, masonry, brick, stone and stucco. Apply to wet or dry walls. Breathable coating so no moisture becomes trapped behind the surface. Holds back 12 PSI water pressure. Heavy duty formula. Can be used as an exterior, below grade foundation sealer on concrete block or poured concrete, prior to applying asphaltic-base coatings. Also for sealing and beautifying basement & garage walls, retaining & sea walls; Safe for coating the inside of cisterns for drinking water.
Henry PR175042 Premier Foundation Coating Damtite 01211 Waterproofer Powder Drylok 27613 Latex Based Masonry Waterproofer
A cold applied liquid asphalt in a solvent system. Penetrating type coating formulated to provide a durable, weather resistant film. For long-wearing protection of foundation coating. Also use to dampproofing above and below grade exterior concrete and masonry walls and foundations that are thoroughly dry. Covers 1.5 to 2.0 gallons per 100 sq. ft. depending upon the porosity and roughness of the surface. Portland-cement base coating. Holds back 22psi of hydrostatic pressure. Safe for drinking water cisterns. Seals, protects and beautifies vertical walls constructed of concrete, masonry, brick or stucco. Eliminates dampness and resists mildew, flaking or chalking while sealing all pores and voids. Helps reduce Radon Gas penetration through concrete block walls. Just add water to powder and mix; brushes on like paint. Mix with Damtite Bonding Additive in place of water for previously-painted or non-porous surfaces (poured concrete). Coverage (varies by porosity of surface and by first or second coat): 7lb to 93 sq ft (8.6 m2); 21lb to 280 sq ft (26 m2); 45lb to 600 sf (55.7 m2). Formulated to waterproof above or below grade masonry walls, cinder and concrete blocks, stucco, brick, retaining walls, basement, and foundations. Tintable. Low Odor. Non-flammable. Resists 10 psi water pressure. Apply with brush and/or roller. Complies with all current VOC requirements. Passes performance requirements of Fed. Spec. TT-P-1411-A. Covers 75 to 125 sq. ft per gallon depending on surface porosity.
Drylok 27513 Ready-To-Use Concrete Sealer Drylok 27514 Latex Based Masonry Waterproofer Drylok 28613 Latex Based Masonry Waterproofer
Formulated to waterproof above or below grade masonry walls, cinder and concrete blocks, stucco, brick, retaining walls, basement, and foundations. Tintable. Low Odor. Non-flammable. Resists 10 psi water pressure. Apply with brush and/or roller. Complies with all current VOC requirements. Passes performance requirements of Fed. Spec. TT-P-1411-A. Covers 75 to 125 sq. ft per gallon depending on surface porosity. Formulated to waterproof above or below grade masonry walls, cinder and concrete blocks, stucco, brick, retaining walls, basement, and foundations. Tintable. Low Odor. Non-flammable. Resists 10 psi water pressure. Apply with brush and/or roller. Complies with all current VOC requirements. Passes performance requirements of Fed. Spec. TT-P-1411-A. Covers 75 to 125 sq. ft per gallon depending on surface porosity. For the most demanding conditions. For above or below grade masonry walls, basement walls, retaining walls, foundations, landscape walls, cinder blocks, concrete blocks, bare concrete swimming pools, stucco and brick. Formulated to resist mildew growth on the paint film. Stops 15 psi. Passes ASTM D-7088 Resistance to Hydrostatic pressure and ASTM D-6904 resistance to wind driven rain. Covers 75 to 125 sq. ft per gallon depending on surface porosity.
Kilz Original Interior Primer Sealer Stain Blocker Rustoleum Bulls Eye Interior Primer Sealer Kilz Original Interior Low VOC Primer Sealer
Blocks most severe stains including water, smoke, tannin, ink, pencil, felt marker, grease and also seals pet, food and smoke odors. Original may be topcoated with latex or oil-based paint. Seals porous surfaces for uniform finish. Use on: wood, drywall, plaster, paneling, wallpaper, masonry, brick, painted metal and properly prepared glossy surfaces. Prevents bleeding. Seals the surface and blocks tough stains from water, nicotine and graffiti. Use to seal porous surfaces like builder's flat paint, drywall, unfinished wood, concrete and other unpainted surfaces providing a smooth, even finish with better topcoat coverage. Ready to recoat in two hours. Dries to a flat finish that sands easily. Can also be tinted. Blocks most severe stains including water, smoke, tannin, ink, pencil, felt marker, grease and also seals pet, food and smoke odors. Original may be topcoated with latex or oil-based paint. Seals porous surfaces for uniform finish. Use on: wood, drywall, plaster, paneling, wallpaper, masonry, brick, painted metal and properly prepared glossy surfaces.
   
 
1 2 3