Home > PLUMBING > KITCHEN & BATH > SHOWER & BATH REPAIR
Choose a sub category:
SHOWER HEADS SHOWER HEAD PARTS & ACCESS. TUB SPOUTS
TUB & SHOWER DRAINS/PARTS
Sort By:
1 2 3 ... 7
Oatey 43561 Snap-In Floor Drain Oatey 42042 Tile Rings Oatey 43565 Snap-In Floor Drain
Designed for drainage in areas where waterproofing membrane is not required.  Plastic Snap-In Drain can be solvent welded or inserted into Sch. 40 DWV pipe.  One piece design does not allow for removal of the cover. 4-1/4"  x 4-1/4" Stainless steel square tile ring. For use with the 151 Series Oatey drains. Designed for drainage in areas where waterproofing membrane is not required.  Plastic Snap-In Drain can be solvent welded or inserted into Sch. 40 DWV pipe.  One piece design does not allow for removal of the cover.
Danco 80001 Tub Spout Ring Oatey 43569 Snap-In Floor Drain Plumb Pak PP826-64 Strainer Dome Cover
Adds a decorative flair to a basic tub spout. Covers gaps and holes. 3-5/8" OD, 2-1/4" ID. Designed for drainage in areas where waterproofing membrane is not required.  Plastic Snap-In Drain can be solvent welded or inserted into Sch. 40 DWV pipe.  One piece design does not allow for removal of the cover. Strainer dome cover with screw.
Danco 80002 Tub Spout Ring Plumb Pak PP826-4 Flat Tub Overflow Washer Plumb Pak PP22612 Face Plate Screw
Adds a decorative flair to a basic tub spout. Covers gaps and holes. 3-5/8" OD, 2-1/4" ID. Plumb Pak Tub Overflow Washer, Flat, Sponge Chrome plated face plate screws.
Plumb Pak Water Saver Economy Showerhead Plumb Pak Water Saver Economy Showerhead Mintcraft B1140WH Shower Arms
Installs to standard 1/2" shower arms. 2.0 gpm flow rate. Adjustable Spray. Installs to standard 1/2" shower arm. 2.5 GPM flow rate. Standard 1/2", Plastic. Overall length 7".
Plumb Pak PP825-50 Shower Drain Grid Oatey 42787 Shower Drain World Wide Sourcing 24500 Bathtub Spouts
3-5/16" O.D. 6.88" h x 4-3/4" w. 2" PVC offset shower drain with receptor base. Solvent welds over 2" schedule 40 DWV pipe. Universal 4-1/4" Snap-Tite strainer. Drain body provides 1-1/2" offset to work around joists and imperfect slab penetrations. Drain body is sealed to shower base with rubber gasket and fiber slip washer. Zinc body; chrome plated finish with reducer bushing. For 3/4'' or 1/2'' pipe.
B & K 133-106 Shower Drain Plumb Pak PP825-7 Shower Arm Diverter World Wide Sourcing PMB-020 Shower Adapters
For use on steel, fiberglass and other types of plastic shower bases. Solvent welds to 2" DWV or Schedule 40, ABS or PVC pipe. 4-1/2" flange diameter, with stainless steel grid. Shower arm diverter, plated plastic, connects personal shower and shower head. 1/2" F.I.P. x 1/2" M.I.P. x 1/2" M.I.P Shower flow adjuster. 1/2" IPS.
World Wide Sourcing 24354 Bath Drain Trip Levers Mintcraft B1140CP Shower Arms Plumb Pak PP826-10 1-Hole Trip lever Style Tub Face Plate
Zinc body. Screws included. Standard 1/2", Plastic. Overall length 7". Plumb Pak Tub Face Plate, 1-Hole, Trip lever Style, Suitable For Use With: Bath Drain, Chrome Plated
Plumb Pak PP825-8 Shower Adapter Control Plumb Pak PP606-23 Clevis Plunger Linkage Assembly Oatey 42097 101 PS Shower Drain
Plated plastic. Flow control and shut off. For trip lever 6" eye wire. 10-32 brass eye bolt. Brass clevis plunger. Designed for use with preformed shower stall bases.  The drain seals to the base with fiber and rubber washers.  2" Schedule 40 DWV pipe solvent welds to the drain base.  Drain top accommodates 4-1/4" universal Snap-Tite Strainers available in a variety of designer finishes. Drain body is sealed to shower base with rubber gasket and fiber slip washer.
Oatey 42086 101 PS Shower Drain Oatey Snap-Tite Round Drain Strainer Oatey 101 PNC Shower Drain
Designed for use with preformed shower stall bases.  The drain seals to the base with fiber and rubber washers.  2" Schedule 40 DWV pipe solvent welds to the drain base.  Drain top accommodates 4-1/4" universal Snap-Tite Strainers available in a variety of designer finishes. Drain body is sealed to shower base with rubber gasket and fiber slip washer. 4-1/4". For 101 PNC and 140 NC No-Calk snap-in shower drains, and 101 PS solvent weld and 2-part shower drains.Carded. Designed for use with preformed shower stall bases.  The drain body is sealed to the shower base with a fiber and rubber washer.  2" Schedule 40 DWV pipe is secured with a mechanically compressed gasket that does not require caulking.  Drain top accommodates 4-1/4" Universal Snap-Tite strainers available in a variety of designer finishes. Compression gasket tightens around 2" Sch. 40 DWV pipe with caulking nut & wrench. Can be used with 1-1/2" Sch. 40 DWV pipe and 1-1/2" or 2" Copper DWV pipe when caulking gasket is replaced.
Plumb Pak PP863-50 Replacement Tip Toe Cartridge Danco 80991 Round Bath Drain Overflow Plate With Lever Plumb Pak PP826-11 2-Hole Trip Lever Style Tub Face Plate
Threaded shaft. Includes screws. 2" center to center holes. Carded. Plumb Pak Tub Face Plate, 2-Hole, Blank Overflow, Suitable For Use With: Bath Drain, Chrome Plated
   
 
1 2 3 ... 7